Tag

cycling Archivi - Cinelli

How We First Met #3: Eric Scaggiante and Cinelli Vigorelli “Vigorosa”

By | News, True Stories | No Comments

Eric Scaggiante is a Milan-based fashion and street photographer as well as proud owner of the Vigorelli Vigorosa (his first track bike) and the world’s youngest ever finisher of the legendary unsupported endurance Silk Road Mountain Race.

We sat down with him in Milan and asked him about how him and Vigorosa met and what cycling has meant to him culturally over the last ten years.

 

If I’m a photographer today it’s thanks to my passion for cycling, which was the first important passion of my life.

I grew up in Spinea, a small town near Venice, and always loved cycling. As a kid for me it was a first taste of independence, and of speed.

But my real passion started in around 2013 when I first discovered the world of alley cat races and fixed gear bikes which at that moment, in Italy at least, were in full boom. I was initiated into this world by the ragazzi of TrueHardcoreCycle (THC).

After discovering this world I immediately started looking to buy a track bike for myself. One day on Subito [an Italian second-hand listings website – ED] I came across a listing for a Cinelli Vigorelli Vigorosa for sale in Treviso, fully-built up, for only €560! A real deal! I was so excited I immediately counted up all my savings from little jobs I’d done and sold anything I owned that had value and managed to scrape together the money to buy it.

 

 

I can still remember how much fun I had on that bike… I rode it everywhere, so much so that my first – and probably only – nickname was “Vigo”.”

 

 

Among the most important races I rode with my Vigorelli I remember in particular my first Respvblica, Italy’s greatest fixed gear hill-bombing race, organized around Genova by SCVDO.

Through this scene and its races I subsequently met another a cyclist called Cesare Pedrini, from Bologna, who at the time was preparing to ride the Transcontinental Race on a fixed-gear. Through him I discovered another new cycling world: unsupported ultra-cycling.

To cut a very long story short I too became interested in ultra-cycling and in 2019 shortly after graduating from high school I flew to Kyrgyzstan where I celebrated my 19th birthday alone in a hotel room and two days later set off to ride the Silk Road Mountain Race. The race was my personal chimera, the single most beautiful, challenging, intense experience of my life. I completed the race becoming the youngest ever finisher and, upon my return to Italy, started my first job, at 3T in Bergamo.

With my first paycheck I bought a camera and from there discovered a new passion. Soon after I quit and began my career as a photographer… But the genesis of everything was the purchase of my Vigorelli Vigorosa for €560 in 2014!

Discover more about the upcoming release of the newly redesigned version of the legendary original “Vigorosa” paint scheme.

CLICK HERE to receive access to purchase the limited edition frame before its public release!

How We First Met #2: Jobst Brandt and Cino Cinelli

By | News, True Stories | No Comments

Jobst Brandt (1935-2015) was one of cycling’s most influential outsiders and inspiring explorers.

A pioneer of riding road bikes off road, he led legendary ‘Jobst rides’, which, years before the evolution of mountain bikes and gravel bikes, took cyclists like Tom Ritchey, Gary Fisher and Eric Heiden deep into the trails of the Santa Cruz Mountains as well as developing meticulously innovative solutions for the modern cycling such as treadles tyres and the first bicycle computer.

Thanks to our old friend and contributor to Cinelli: the Art and Design of the Bicycle, Max Leonard we recently discovered that Brandt was a passionate customer of Cinelli’s framebuilding department throughout the 1950s, 60s and 70s, purchasing at least six bikes over these three decades as well as taking priceless photos of the factory and Cino. Because of Brandt’s longstanding passion for using road bicycles offroad, Cino’s own familiarity with these surfaces from his days as a professional in the heroic 30s and 40s we were extremely curious to discover more about the technical dialogue and relationship between these two very different, very opinionated innovators of the modern racing bicycle and how it might relate to gravel cycling innovation today.

Below are notes and photographs from Max’s soon to be published book on Brandt for which you can pre-order a copy and support the project HERE.

 

Throughout the course of his life Jobst also spent almost fifty summers in the Alps, lightweight touring and adventuring over 2,000 miles each time, always carrying a camera to document his trip. On his first Alps ride, in 1959, he paid a visit to the Swiss tyre manufacturer Sieber, who persuaded him to swap to wooden rims (Jobst’s tubular glue was melting on his Fiamme alloy rims on the long Alpine descents).
Then Jobst headed to see Cino Cinelli.

“The next morning with tires glued and wheels true,” Jobst wrote in his journal, I thanked Mr Sieber for all his help and rolled on to Milano where I stopped at the train station and got rid of some extra clothes into the suitcase. I headed east across town on the via Andrea Doria and via Porpora to Lambrate, to via Egidio Folli 45 where the Cinelli factory is located, producing bicycles, bars, and stems at a great rate. Mr Cinelli’s office lies next to a branch of the Lambro river that is apparently a main sewer outfall”.


“I found a sharp contrast with the surroundings and the buzzing thriving factory that was producing such elegant machinery. Mrs Cinelli briefly mentioned her days at Sieber, and that she had been his secretary for years when a young bicycle racer from the Toscana, who dropped in for equipment on occasion, offered her his hand. Cino looked at my bicycle and how it fit me and said that he would do something about that tomorrow after giving it some thought”.

“In the morning he had me ride around the yard a few times and then raised the saddle a bit and moved it forward. He put his newest model 360mm extra wide bars with deep reach on a 120mm stem, placing the brake levers in a better position. Down below I got the newest Campagnolo crank spindle and 180mm five-pin Cinelli (Magistroni) steel cranks that finally gave me true running chainwheels in contrast to the previous three pin style. He was disturbed by my choice of wooden rims and tried to get me back on Fiamme aluminum but I didn’t take.”

 

 

 

“I had asked Mr Cinelli what the greatest road in the Alps was, to which he replied without hesitation, the Stelvio, but that I might not like it because it was unpaved.

That especially caught my interest so here I was heading up the Valtellina at Tirano where the road to the foot of this great pass starts its climb.”

 

 

The bike Jobst was riding on this trip was a 62cm blue Cinelli Super Corsa, ordered from Spence Wolf’s bike shop in Cupertino, California.

Jobst ordered one such frame in 1957 and one in 1958. After the 1959 Alp tour, Jobst took a job at Porsche in Stuttgart, where he translated the manual to the 356 and later worked on race car suspension. From his new European home he visited Cinelli again on his Alps tour in 1960, and then throughout the 1960s and 70s.

In 1962 he ordered a Super Corsa direct from Cino, and in 1964 he took his new wife Helga on a tour of the Alps, during which they stopped off at Cinelli to pick up a matching frame for her (which she still owns). They also dined with Cino and family in his private apartment. Helga’s bike features a very early set of vertical rear dropouts, which had been designed and manufactured by Jobst; later, he claimed Cinelli must have passed these to Campagnolo and that they became the model for Campagnolo’s own.

Back in the USA after he married, he would go on to order at least another Cinelli from Spence Wolf in Cupertino, in 1971, and kept up a correspondence with Cino into the 1970s.

After meeting and riding with Tom Ritchey, who was building fillet-brazed road frames while he was still in high school in the 1970s, Jobst began riding a Ritchey frame, and ended his riding life on a frame built another California builder, Peter Johnson.

All in all, Jobst owned at least six Cinelli frames. None of them survive: as a 6’5″ rider who liked to ride on dirt, he was hard on frames and components, often cracking, shearing or denting what he rode.
He was not shy of pointing out what he saw as manufacturing defects even to master builders like Cino Cinelli!

Pre-order your copy of Jobst Brandt: Ride Bike!   HERE 

Discover more about the history and contemporary practice of Cinelli steel framebuilding  HERE